Integrated “Rewinder 2000” Option for 6404, AP5.4, AP7.t, TTX350 and TTK
AveryTM Dennisons Rewinder Option is stepper motor powered, strong and dependable. It will wind in either direction, has fully variable speed governed by a spring-tensioned dancer arm (which insures smooth operation), will rewind rolls up to 8.3” in diameter, and can run at print speeds up to 12”/second.
The “U” shaped bail design makes it fast and easy to unload full rolls.
Since it is controlled by and mounted directly to the printer, there are never any “jerking” or alignment problems. It can be installed or removed by the End User in about 10 minutes.
Rewinders are available for 6404, 6405, and 6406 but not the 10” wide 6408.
*NOTE: A 6406 Rewinder could be used with a 6408 for material up to about 7.5” wide.
Printer Model Used With 6404, AP5.4, AP7.t, TTX350 and TTK. Not Compatible with Dispenser.
Integrated “Rewinder 2000” Option for 6404, AP5.4, AP7.t, TTX350 and TTK
AveryTM Dennisons Rewinder Option is stepper motor powered, strong and dependable. It will wind in either direction, has fully variable speed governed by a spring-tensioned dancer arm (which insures smooth operation), will rewind rolls up to 8.3” in diameter, and can run at print speeds up to 12”/second.
The “U” shaped bail design makes it fast and easy to unload full rolls.
Since it is controlled by and mounted directly to the printer, there are never any “jerking” or alignment problems. It can be installed or removed by the End User in about 10 minutes.
Rewinders are available for 6404, 6405, and 6406 but not the 10” wide 6408.
*NOTE: A 6406 Rewinder could be used with a 6408 for material up to about 7.5” wide.
Printer Model Used With 6404, AP5.4, AP7.t, TTX350 and TTK. Not Compatible with Dispenser.
Integrated “Rewinder 2000” Option for 6404, AP5.4, AP7.t, TTX350 and TTK
AveryTM Dennisons Rewinder Option is stepper motor powered, strong and dependable. It will wind in either direction, has fully variable speed governed by a spring-tensioned dancer arm (which insures smooth operation), will rewind rolls up to 8.3” in diameter, and can run at print speeds up to 12”/second.
The “U” shaped bail design makes it fast and easy to unload full rolls.
Since it is controlled by and mounted directly to the printer, there are never any “jerking” or alignment problems. It can be installed or removed by the End User in about 10 minutes.
Rewinders are available for 6404, 6405, and 6406 but not the 10” wide 6408.
*NOTE: A 6406 Rewinder could be used with a 6408 for material up to about 7.5” wide.
Printer Model Used With 6404, AP5.4, AP7.t, TTX350 and TTK. Not Compatible with Dispenser.
icon for a quick look at the item